If you have any trouble logging in to your account, contact us.
To start 3D printing or Laser Cutting, you'll need to create an account here. Once done, you'll be able to upload your files and get live quotes of yours parts
Already have an account? Log In
With 3D printing being used more and more for turning out ready-made products, it is critical to have access to a means of coloring the parts. With this in mind, a process for obtaining a finish similar to mass-colored plastic has been developed; that is, dyeing .
In contrast to painting, which applies a surface coating to the part, dyeing colors the plastic deeply. This guarantees vibrant colors in particular, but also makes it possible to avoid the phenomenon of peeling or scratching which can occur with paintwork. The lack of excess thickness prevents loss of detail, thus conforming most closely to the original design. What’s more, dyeing reaches all surfaces of the part, including the most inaccessible recesses, resulting in a very uniform finish . This attribute is critical, particularly when 3D printing technology has been selected because of the complexity of the part.
These various advantages make it possible to go from a completely white part to a finished product in fewer steps and therefore at a reduced cost.
The parts are simply immersed in a heated dye bath before being dried.
This process is suitable for our white plastic parts as well as for our alumide parts. For the latter material the finish is similar to glitter – only the plastic is tinted, not the aluminum particles.
Although our team ensures maximum uniformity of colors, a slight difference in the colors of the parts can sometimes be detected . This is due to the fact that dyeing is sensitive to small variations in the bath conditions. In the event of too great a deviation from the reference color, we will reproduce the part in order to satisfy your expectations as fully as possible.
Dyeing adds no extra days to the production times for your parts except in the case of economy production, which means:
The maximum size of your designs is limited by the physical size of our dye baths.
|Maximum size for dyeing||180 x 220 x 220 mm|
There is no minimum size for polyamide printing; just bear in mind that in order to ensure that the item will not break, the minimum thickness of the structural elements is 0.8 mm.
With Sculpteo’s online 3D printing service you’re just a few clicks away from professional 3D printed parts. Your 3D model is printed and finished with the highest quality and delivered straight to your door.
Get started now!